ABSTRACT The effects of diets containing oilseeds were measured to evaluate the productive and economic parameters in the finishing of young, feedlot Nellore bulls. Twenty-four young Nellore bulls were used, with an initial body weight (BW) of 311.46±0.37 kg and 24 months of age, distributed into individual stalls ( 4 × 20 m) in a completely randomized design, totaling four treatments with six repetitions per treatment. Four diets (control, based on corn and soybean meal, and three diets containing cottonseed, soybean, and sunflower) were evaluated. Feed and orts were measured daily to calculate intake and costs. The dry matter intake of the control group was higher than soybean (10.64 kg/day), cotton (9.88 kg/day), and sunflower (9.30 kg/day) treatments, respectively. The cottonseed treatment showed the highest average neutral detergent fiber intake. There was a dietary effect of diets on average daily gain, total weight gain, and final weight. The soybean treatment showed the highest performance, total gain (232.55 kg), and final weight (544.38 kg). Oilseed intake can modify the fatty acids profile in the meat, decreasing its saturated fatty acid content. Whole soybean seed favors performance, improves feed efficiency, fatty acid profile, and fat distribution in the carcass, and can reduce production costs.

ABSTRACT. The objective of this study was to examine the performance of ewes in the post-weaning phase and the structural characteristics of Brachiaria brizantha cultivars in the dry season. The treatments were represented by four Brachiaria brizantha cultivars (Piatã, Marandu, Paiaguás, and Xaraés), which were evaluated in a randomized-block design with two replicates for the forage variables and eight replicates for the animal performance variables. Canopy height, masses of forage and morphological components and chemical composition of morphological components were evaluated. Thirty-two ½ Santa Inês and ½ Dorper sheep with an initial body weight (BW) of 22.7 ± 1.2 kg were used. Average daily gain (ADG - kg animal-1 day-1), stocking rate (in animal units [AU] = 30 kg of body weight) and weight gain per area (kg ha-1 day-1) were measured. There was no cultivar effect (p > 0.05) on the structural characteristics of the pasture. The highest crude protein content in the leaf blade (11.8%) were found in cultivar Marandu. Average daily gain was higher in the animals that grazed on cultivar Marandu (0.08 kg animal-1 day-1) as compared with cultivars Xaraés (0.05 kg animal-1 day-1) and Piatã (0.04 kg animal-1 day-1), whereas the ewes that grazed on cultivar Paiaguás showed intermediate ADG values (0.06 kg animal-1 day-1). There was no difference between the cultivars for stocking rate (9.2 AU). Weight gain per area was highest in cultivar Marandu (0.33 kg ha-1 day-1) and lowest in cv. Piatã (0.16 kg ha-1 day-1). Brachiaria brizantha cultivars Piatã, Marandu, Paiaguás and Xaraés proved to be forage options for the post-weaning phase of ewes supplemented with concentrate in the dry season.

RESUMO: Há pouca informação sobre se o aumento da produtividade secundária observada em pastagens fertilizadas com altas taxas de nitrogênio é atribuível a flutuações no valor nutricional ou nas características estruturais das pastagens, ou em ambas. Objetivou-se identificar grupos de caraterísticas (estruturais e nutricionais) que melhor explicassem o desempenho de novilhos de corte em pastos de capim-mombaça sob efeito residual de doses de nitrogênio. Os dados foram coletados em pastos de capim-mombaça que receberam três doses anuais de nitrogênio (N) (100, 200 e 300 kg ha-1) de 2015 a 2017. No ano de 2018 não foi utilizada adubação nitrogenada, para caracterizar o efeito residual do nutriente. As variáveis avaliadas foram relacionadas às características estruturais, taxa de acúmulo de forragem (TAF), altura do dossel, massa de forragem (MF) e dos componentes morfológicos. Também foi avaliado o valor nutritivo da lâmina foliar e o desempenho dos novilhos através do ganho médio diário (GMD) e da taxa de lotação. A partir do banco de dados foi realizada a análise de componentes principais. Os resultados demonstraram que 99,6% da variação no conjunto de dados foram explicados por apenas dois componentes principais (CPs), e 90,0% desse valor corresponde ao CP1. As características de maior magnitude para a diferenciação dos tratamentos no CP1, em ordem de prioridade foram: TAF, MF, massas de lâmina foliar e de colmo. Essas variáveis estiveram positivamente associadas com a taxa de lotação. Já o GMD não se relacionou com nenhuma variável. O GMD foi a variável de maior importância para o segundo CP, entretanto, esse CP teve pouca contribuição (9,6%) para a elucidação do resultados. As características estruturais (TAF e MF e compondes morfológicos) do pasto explicam melhor as oscilações em pastos de capim-mombaça sob efeito residual de doses de nitrogênio. A taxa de lotação é um parâmetro eficiente para apoiar a tomada de decisão em pastos manejados com lotação variável.

ABSTRACT: There is little information about whether the increased secondary productivity observed in pastures fertilized with high nitrogen rates is attributable to fluctuations in the nutritional value or pasture structural characteristics, or both. This study aimed to identify a set of factors (structural and nutritional characteristics) that best explain the performance of beef steers grazing Mombasa grass pastures under residual effects of nitrogen fertilizer. The data were collected in Mombasa grass pastures fertilized with increasing rates of nitrogen (N) (100, 200 and 300 kg ha-1) from 2015 to 2017. In 2018, nitrogen fertilization was not used in order to characterize a residual effect of the nutrient. Variables related to pasture structural characteristics such as forage accumulation rate (FAR), canopy height, forage mass (FM) and morphological components were evaluated. The study also evaluated the nutritional value of leaf blades and the performance of beef steers based on average daily gain (ADG) and stocking rate. Principal component analysis was performed using the dataset available. Most of the variance (99.6%) was explained by only two principal components (PCs), of which 90.0% corresponded to PC1. The most influential parameters for PC1, in order of priority, were: FAR, FM, leaf blade and stem masses. These variables were positively associated with stocking rate. Conversely, ADG was not associated with any variable. ADG was the most relevant variable for the second PC; however, this PC explained less variance (9.6%). The structural characteristics of the pasture (FAR, FM and morphological components mass) better explain the fluctuations in the performance of cattle on pastures of Mombasa grass under residual effects of nitrogen fertilizer. The stocking rate is an efficient parameter to support decision-making in managed pastures with variable stocking.

RESUMO: Objetivou-se avaliar os modelos matemáticos Gompertz, Groot, monomolecular, Richards e logístico bicompartimental para estudar a cinética de produção de gás in vitro de dietas compostas de combinações de feno ou silagem de Gliricídia. Além disso, avaliou-se os efeitos da inclusão de feno ou silagem de Gliricídia sobre a produção cumulativa de gás in vitro destas dietas. A cinética de fermentação ruminal foi avaliada pela metodologia de produção cumulativa de gás in vitro. Os parâmetros dos modelos foram estimados usando o método de Gauss Newton, com exceção do modelo de Richards, que foi usado algoritmo de Marquardt. O ajuste dos modelos foi avaliado por meio do coeficiente de determinação, teste F para a identidade dos parâmetros, coeficiente de correlação e concordância, raiz quadrada do quadrado médio do erro da predição e a decomposição do quadrado médio do erro da predição em erro médio, vício sistemático e erro aleatório. Os modelos foram comparados quanto à acurácia (quadrado médio da predição pareado) e quanto à sua precisão (critério de informação delta de Akaike). Todas as estatísticas de avaliação e comparação dos modelos foram calculadas usando o software Model Evaluation System versão 3.2.2. Os modelos de Groot e Richards não diferiram entre si (P>0.05) e foram os mais precisos e acurados (P<0.05). Portanto, modelo de Groot foi selecionado devido apresentar melhor acurácia e precisão e apresentar maior facilidade na obtenção dos parâmetros. A inclusão da silagem de Gliricídia na dieta, resultou em elevação no tempo para obtenção da máxima taxa de degradação e no tempo após a incubação em que metade do nível assintótico foi atingido. Recomenda-se a utilização do modelo de Groot para estimativa da curva média. A inclusão da silagem de Gliricídia altera a curva de produção de gás devido o maior tempo necessário para que a dieta atingisse a máxima taxa de degradação, isso pode elevar o tempo de permanência da dieta no rúmen e promover redução no consumo.

ABSTRACT: This study examined the use of the Gompertz, Groot, monomolecular, Richards and two-compartment-logistic mathematical models to investigate the kinetics of in vitro gas production of diets composed of combinations of Gliricidia hay or silage. In addition, the effects of Gliricidia hay or silage inclusion on the in vitro cumulative gas production of these diets were evaluated. Rumen fermentation kinetics were analyzed by the in vitro cumulative gas production methodology. The model parameters were estimated using the Gauss Newton method, with the exception of the Richards model, which was used by Marquardt’s algorithm. Model fit was assessed using the determination coefficient, F test for parameters identity, concordance correlation coefficient, root mean square error of prediction, and decomposition of mean square error of prediction into mean error, systematic bias and random error. The models were compared for accuracy (pairwise mean square error of prediction) and precision (delta Akaike’s information criterion). All model evaluation and comparison statistics were calculated using Model Evaluation System software version 3.2.2. The Groot and Richards models did not differ from each other (P>0.05) and were the most precise and accurate (P<0.05). Therefore, the Groot model was selected due to its better accuracy and precision and easier access to the parameters. The inclusion of Gliricidia silage in the diet resulted in an increase in the time to obtain the maximum rate of degradation and in the time after incubation when half of the asymptotic level was reached. The Groot model is recommended to estimate the average curve. Dietary inclusion of Gliricidia silage alters the gas production curve due to the longer time required for the diet to reach the maximum rate of degradation, this can increase the time the diet remains in rumen and promote a reduction in the consumption.